I think another challenge for farming equipment would also be the uneven terrain, risk of things coming up and piercing or shorting the battery, and also overheating. The first one can be fixed by installing a metal plate like Tesla did after cars kept blowing up. The overheating part might be a bit more tricky. I suppose an air conditioner dedicated to the battery would work alright.

The other thing is, using it day in and day out, from sunrise til sunset or even later, will probably wreak havoc on the battery health. I know EVs in general suffer from this, too, but I feel like it’s even worse for farming equipment, because you know they’ll get a let of extreme use, whereas a lot of people with EVs might only use it for a commute into the city, or a trip to the shops

One final thing, just based off the farmers I know (used to live in the country), a lot of them, maybe even the vast majority, have no interest in upgrading until they have to. If it works, it works. Anything new might not work as well, and require precious time to learn how to use well or properly. They tend to skew towards the older generation, and emissions just aren’t really a concern. Since EV fires tend to make the news a lot of the time, if they’ve got a perception that getting an electric tractor might cause a bushfire and burn their entire farm down, even if that’s very unlikely, and maybe even more likely with a diesel, I don’t think you’ll find them very willing

(This is specifically in regards to Australian farmers I’ve known, perhaps farms elsewhere are smaller, or farmers elsewhere a bit more willing to take upgrades)

I bought a really nice, high quality, very fast charging and data transfer cable, and there’s one device I own that it will not charge at all. My assumption is that it probably doesn’t have a charging control chip or something else required to work with that cable. It doesn’t work with any other USB-C to C cables I own either. It has to be charged with the USB-A to C cables included in the box

I wonder, would this law also cover if, say, the company manufacturing the toothbrush decided not to supply a power cord with the dock, and just stuck some proprietary cable port on it (not even a DC barrel jack or anything like that)?

I really wish my autocorrect would stop doing that. I can count on one hand the amount of times I’ve actually wanted to write “PowerPoint”. I couldn’t even count on 10 hands the amount of times it’s assumed I’m some kind of idiot that doesn’t know “PowerPoint” is a single word when I type “power point”

Ah, no worries! I’m not sure if it’s even universally agreed upon across native English speakers. Where I’m from though, a powerboard (or power strip in other parts of the world) has one plug that then leads on to usually 4 or more additional power points/sockets. An extension cord on the other hand usually only allows a single device be connected to it (whether that’s another extension cord or something else)

Awesome answer - thank you!!

Although I guess a more general question - why aren’t all power boards and extension cords mandatorily fitted with their own circuit breakers/overload protection circuits? I guess it’s cheaper to just tell people never to daisy chain, but at the same time, when you factor in overall costs incurred by anybody (or insurance companies, etc) from people unintentionally overloading them and causing them to melt and burn down houses, wouldn’t it be in everybody’s best interests to raise the price a few dollars and include a resettable overload protection system?

This, along with hotels that hide their only power point behind the bed but have 50 bloody phone jacks, are my pet peeves. But it kinda makes sense when you consider they were mostly built before the days of having a ton of devices in the bedroom. A lamp and alarm clock, maybe a TV if you’re well off, would’ve been perfectly fine for a lot of people

I think that would be more relevant to power boards than extension cords. Unless nomenclature is different elsewhere, extension cords here generally only have a single plug. Although there are usually warnings to not run things like clothes dryers or portable stovetops through an extension cord because it can apparently melt the cable. Truthfully, I don’t entirely get that either, as I would’ve assumed they’d be built to the same standard as internal wiring

Thanks for the response! Would you mind going a bit more in depth about that please? I could understand increasing the risk of overload if you were to daisychain power boards, as they add more power points to the circuit than it was designed for. But extension cords (at least in my experience) only have 2 ends - one with a single plug receptacle, and the other that plugs into a power point

Is it the actual connection between the two that adds more resistance to it? If it were the wiring, then wouldn’t that also pose a problem for longer extension cords?

In either case, what sort of resistance add are we talking about (feel free to pick random lengths of examples make it easier to explain)?

Neat, TIL!

Let me answer that question in a lot less words than the article:

Does a high-quality camera phone always come with a high price tag?

• no.

I wonder if that means we can claim adverse possession

It always makes me chuckle a bit how internet censorship (at least in western countries and on a personal level (school and work networks excluded)) is almost always just done through DNS. I mean I’m sure not going to be the one to tell them how laughably ineffective that is, but it’s just funny.

Thanks!

Heya, sorry for the necropost, but would you mind sharing how you’re doing on storage these days? I’m looking at spinning up a Lemmy instance of my own and I’m curious about the storage aspect on small instances

I guess the mods didn’t find this very funny, since they nuked it. Disappointing, because I was able to read it through the magic of caching and it made me crack up laughing

As far as I know, no

Is Lemmy growing or shrinking?

It looks like Lemmy has shrunk overall since our peak of 68k active users in July last year to our low point (since rexxit anyways) of 32k, but we seem to be attracting more MAUs now and have climbed back up to 51k.

I’m not entirely sure what you mean by diversity, or at least what measure of it you’re seeking, but if you mean instances, there’s currently ~770 instances online, a bit over half of our peak in July. I’m not aware of any major instances that have closed down yet though, so I assume it’s mainly small, single user instances that have shit down, as well as a few hyper niche ones with very few members.

Average users per instance has also been increasing and is getting close to the levels we were at in june when everybody was joining the same few instances. That peak was 690 users per instance, that dropped to a low of 321 in July, presumably because there was more of an emphasis on getting people spread out after initial influx of people who just needed to go somewhere.

There was something interesting I noticed in the stats, in Feb there was a major drop in total posts of almost 5 million. I don’t know what exactly happened, but our total posts halved, so perhaps that’s why nobody’s been posting updates.

It’s even more obvious on the 120 day graph

Overall, it appears we have shrunk compared to our peak during rexxit, but we have been steadily increasing in both active users and posts (excluding the major drop in Feb) since our low point a couple of months after rexxit. That’s about what I’d expect, and quite good compared to most popular corpo sites which lose a lot more percentage of their MAUs after they’ve peaked. Threads lost something like 80% of their userbase a week after it launched. Also I don’t think that peak during rexxit will be our biggest peak. We’ll probably continue steadily gaining users until Reddit fuck up again and we get another influx, like what happened with mastodon.

FYI all these stats are fairly easy to find. I like FediDB because it’s got a more friendly UI, but Fediverse Observer has a more plain UI, so is better for posting graphs and such. But that’s the beauty of the fediverse, we can all access the same things through all sorts of UIs

Oh, yeah, you’re probably right. Unfortunately I absolutely do not have the knowledge required to do that, but I’ll keep it in mind. Thanks

Oh good idea, thank you! Yeah, I think because of the federation stuff, it should persist, although I think that will complicate searching and finding things. I’m pretty sure this is the largest instance to go down to date, so I’d rather be safe than to lose things, even if it is only a small instance.

This does make me a bit nervous for how archiving larger instances will look when one eventually dies, though. A spider that logs everything into a spreadsheet and then splitting into different groups would probably be the best option. Or maybe a local ArchiveBox setup could work too. All the Lemmy admins seem fairly resonable though, so perhaps they might even upload everything directly into the Internet Archive themselves