It would cause ghosting if pixels weren’t allowed to change quickly.
There are crt simulator filters for RetroArch where you can control all the parameters. So the code for moderating how fast brightness can change has been done but only for games running inside of RetroArch.
You don’t watch all of his videos which is why you have the wrong idea. It’s the 2024 video where he reviewed Tru Tone.
If products are compared in detail and a suggestion to buy is given, it’s a review.
It doesn’t matter what you think the channel is supposed to be. What matters is the content.
At this point you are nitpicking and being pedantic to attempt to “win” an agurment not being had.
You wrote 3 paragraphs to avoid admitting that despite my writing about his detergent video, you responded with his dishwasher video because you haven’t watched all his content!
Comparing samples with an independent lab isn’t a review? Come on. As I already said just because most of his content is “talking head”, doesn’t mean he can’t recommend products. Which he clearly has done.
What kind of scavenged screen? Laptops? Because non-laptop small lcds are an undocumented mess. You’d do better to buy screens that work with esp32s.
It isn’t a scam. It is an asset like buying land in the middle of nowhere. It will in general match inflation but underperform most other investments. In the very long term I would expect that with global population stabilizing and declining, the value of gold will also stabilize and decline.
His dish washing video went to great lenghts to explain how something works
That’s a different video. He recently did another video of detergent and why his brand of detergent that he is selling for charity is better than pods.
His dish washing detergent video went to great lengths to create experimental comparisons to show his brand of detergent is better than pods. He has done experiments with other products too like dehumidifiers.
He is promoting a product. That product possibly has what many perceive as a severe defect (flicker). He could say it doesn’t personally bother him but still compare it to other lights in the same way he compared colors in detail. Is the flicker large or small?
I love his channel and watch every video. But that doesn’t mean I have to ignore when he misses a detail.
Careful reviewers cover all factors independent of their personal bias.
Teflon will eventually flake off even if babied. The problem is thermal stress between the aluminum and Teflon. Repeated heating and cooling will eventually cause it to fail.
I meant ignore in the context that he said it doesn’t personally bother him.
His obsession over color quality while ignoring the flicker is very annoying.
3d printing. Custom parts for the house. Replacement plastic bits that broke or got lost. Custom toys for gifts.
The problem I’ve had with 3mfs is that if you don’t select “import geometry only”, you can get changes to a bunch of print settings that you don’t want changed. And if you import geometry only then the Orca modifiers aren’t imported.
I want to make the file as easy to use for others. I’ve seen other kit card models with decals in the STL so I know it’s possible.
I’ve used some of the tips in this thread and it’s helped my decals tremendously.
The Xeon 2224G workstation with 32GB of ECC ram I got on eBay pulls 15 watts from the wall streaming 4k video on Plex.
It didn’t have 6 bays but if I needed it I could move the guts to a bigger case
I bought a used Coffee Lake era Xeon 2224G workstation with 32GB of ECC RAM to use as a NAS. It uses 15 Watts at the wall measured with a killawatt while streaming 4K with Plex.
Oh cool! You’ve done decals? Have you ever seen the same issue where Orca’s SVG modifiers create perfect filament paths compared to the gcode it creates for STL/Step file geometry?
Yeah the decal is cut out from the model and then the intersection part becomes the decal. I also tried raising it .2 from the surface because I’m using a .2 layer height. I’ll try raising it higher.
I just learned there’s a 3d print option in fusion so I can keep the objects set when saving as stl. I’ll try that too.
It’s weird that Orca can create high quality filament paths using modifiers but I can’t achieve the same thing with model geometry.
I could try to delete some polygons in the middle so it’s flatter. Thanks for the idea.
He did a comparison of products ending with a recommendation. That’s a review.
I don’t know why you can’t accept that.