I got mine a while ago, so they must have changed the firmware they have by default since then. Mine had some flavor of marlin with a super simple touchpad. Or maybe I have the 3 pro… Honestly, it’s been like 3 years and I still have to unpack the thing since moving, so I could be wrong on the exact model >.<

Edit: I looked up the old receipt its the 3 pro sorry ;-;

Weird, my neptune 4 pro just has metal spacers and no bed screws. Maybe they fixed it in a later release.

Edit: its the 3 pro my bad I’m dumb ;-;

I’ve only had the 4, but it serves me pretty well. I do have some issues with calibration sometimes but it’s pretty fixable with some tinkering. I think theferalengineer on youtube also has some videos about the neptune 3 and 4, he’s where I figured out how to put klipper on my 4 pro. Edit: I’m dumb I have the 3 pro sorry!

If you get the 4 pro, keep in mind it has auto bed leveling but if its uneven beyond the ability of the software it doesn’t have bed screws. I’ve had to shim mine with foil to make it level Edit: I’m dumb i have the 3 pro sorry ;-;

My first guess would be your first layer is too low, just cuz the wrinkles usually imply too much material so it has to wrinkle up to make room.

Holy fuck I used to play this on school computers during lunch. When I played it was pretty easy to end up in active games, but I’m not sure how that’s changed over time. I really should reinstall it for nostalgia’s sake.

I already know you aren’t going to change your mind, and I already answered your initial question, so why would I keep arguing with the proverbial village idiot?

None of these people “make” anything. They get paid millions to tell other people to make things. Overpaid. If you can’t grasp that, I don’t think I can help you. It’s like trying to convince the village idiot the factory owner isn’t the one making the product. CEOs have value, but the value is not worth what they’re paid. He gets no extra credit from me for being an overpaid manager, who is also a piece of shit human being.

I rephrased it, but I still dunno how you’re finding somebody “petty”. Petty implying shallow, vain, selfish. And somehow Musk is… better than most CEOs? The man who didn’t like people shit talking him on Twitter so he bought it and ran it into the ground?

Are you saying other CEOs look petty? Or the actual employees and talent at SpaceX look petty?

deleted by creator

Sure a CEO does other shit. It’s all the same stuff a manager would do. You really think that if daddy Musk vanished the literal rocket scientists working there wouldn’t be able to keep doing their work? The trained accountants and managerial staff would curl up under their desks unable to carry on? The value of a CEO is both real, and extremely overstated. They’d have a new CEO before the end of the month.

In a nutshell, yes he runs the company. No it isn’t some badge of genius, he manages a company. Many other people are just as, if not more qualified.

If he keeled over dead SpaceX would keep functioning as it is held up by the actual employees who do the actual work. All a CEO does is provide goals, directions, and demands for more profits. They’re a glorified overpaid manager and those are not in short supply.

I put the foil in larger squares to fit under the silver metal tubes used as offsets for the heated bed. I’m not sure if foil under the pei will work, my worry would be making the bed uneven vs just adjusting the position. I just remember getting under the silver tube things was a massive pain in the ass so I do hope the pei sheet idea works tho lol

Is this the one that doesn’t have adjustable bed springs? I had a bed that wouldn’t level on the neptune pro with no adjustable springs and software couldn’t compensate outside of small prints.

I had to take the bed apart partially and use little shims (in my case tinfoil) to even the bed to the point where mesh leveling could handle the remaining flaws.

It’s not like I make or save a lot of money from it, but as a hobby it’s been amazingly fun. Getting into basic 3D modeling has been really cool too, nothing quite hits like making something entirely unique and designed for a specific purpose, then watching your printer just crank it out in a day or two and your imagined thing is all the sudden real.

I’m sure other hobbies can do that too, but for me it was a really awesome feeling :)

I remember a chip clip model, but I can’t for the life of me find it >.<

That and just printing parts where multiple colors don’t matter.

“but seriously” “It was sarcasm” Ok bud :)

I mean they presume that people experience heat. We all know the weather changes, it’s a bit patronizing to be like “well u know its not always hot, on this post about heat”.

We know lmfao.

Damn, good thing two wrongs make a right huh? What was that quote about an eye for an eye? Makes the whole world get a mild rash? I don’t recall.