I don’t know if I would call it lying per-se, but yes I have seen instances of AI’s being told not to use a specific tool and them using them anyways, Neuro-sama comes to mind. I think in those cases it is mostly the front end agreeing not to lie (as that is what it determines the operator would want to hear) but having no means to actually control the other functions going on.

Amphenol connectors. Used a ton in industry, military and aerospace. They are actually really nice when you get down to it, but you need expensive tools and the connectors themselves are usually quite expensive. I once had a client ask for a specific 6 pin one, only about the size of my thumb, it was $800.

Yup, heard about it a week or two ago. Found it installed on my Samsung phone, it never asked for permissions or gave any info that it was added to my phone.

Hi, not gay but bi and I spend a lot of time in LGBTQ spaces. I personally have not heard of this meaning anything specific. Chances are that it’s just a quirky / goofy expression that they like. I have a few friends who are not gay where every photo has a similar expression, it’s just something some people do I guess 🤷

Has it always done this or is this a new issue? I agree with what someone else said, I think this is likely a bed leveling issue. The P1S uses pressure sensing using it’s nozzle for bed leveling. If the screws holding the hotend in place aren’t tight enough, it might be giving you poor readouts. This could happen after a nozzle swap if you’ve done one before. Same if the print head itself has a lot of play in it for some reason, it would throw off the results.

Just last week actually. I was visiting my parents and we were having dinner with the radio on. I started talking about how I was learning the piano and had most of The Scientist by Coldplay learned, and how I like the piano part in the song a lot. And as I finished talking, it came on the radio, just perfect timing. I actually thought the smart speaker somehow picked up on me saying the song name but nope, definitely was just good timing on the radio station.

It’s just the chassis, screen, battery, and keyboard. You would just buy one of their boards separately to go in it, or make one yourself I suppose.

This is entitely on brand for Bitcoin Cash from what I remember years ago when the split happened. I wouldn’t go so far as to call it a scam coin, but the community was very sketchy.

Wouldn’t it be good to have the truth during investigations?

Well, yeah, but the mind is fallible. That’s why eye witness testimony usually only gets a case so far, people tend to forget specifics and fill in the gaps without realizing they did.

In the gaming world, for example, MSI announced this year a monitor with a built-in NPU and the ability to quickly show League of Legends players when an enemy from outside of their field of view is arriving.

…So it just lets them cheat? I remember when monitor overlay crosshairs were controversial, this is insane to me.

Lmao timers are essentially the only thing I use Bixby for, how did they manage to fuck this up so bad??

If a consumer watches something on their Apple TV and then presses the pause button, a Roku TV set could use either audio or video-based content recognition technologies (known in the industry as ACR) to identify what’s being watched, match the current scene to a database and extract relevant information to pair an ad with it.

Wow somehow their idea is even worse than I imagined, glad I don’t own a Roku now.

Reaminds me of this legendary Aussie. https://youtu.be/SoZ41i2dSIw?si=Er-JrpdsBLnMD5hH

My roommate from a year ago was adamant CCleaner was required for his PC to keep running. In 2023. I was just shocked to see it was still even a thing.

I enjoy that the character that can break a lot of things is called the “non-breaking space”.

Makes me glad I still have access to my old university email and credentials.

Alberta within the last few months switched from a private company doing lab testing back to the old provincial run system, wait times for appointments went from over a month to a few days for me. And that celebrating was cut short by the fact they want to split up AHS now which is more likely going to screw up a bunch of our healthcare again.

I just went through this process when I got a Dreame D10 Plus which has an identical root process as the L10s a few weeks ago with the intent of putting Valetudo on it. I ended up trying but failing after one of the header pins I was trying to flash it with broke off in the machine. If you are brand new to this stuff, personally I wouldn’t recommend trying it. If you still want to try, do not update the robot once you get it and either buy one of the programming boards or at the very least have some 2mm pitch header pins around (standard in NA is 2.54mm). I really wanted to run mine locally as well (don’t like the idea of someone gaining access to a full lidar map and remote controlled camera in my house) and hope in the future an easier method is discovered. I don’t know about the base station for each floor thing, I do know that Valetudo only supports a single map. From what I understand that means you’ll have to re-map each floor before cleaning. If you only want Home Assistant intergration there is a HACS intergration for Dreame that allows for multiple maps. You used to have to jump thorough some hoops and use it with Xaomi cloud or something but the newest beta allows sign-in using the Dreame app credentials.

I went through a somewhat similar situation to you it seems. I’m a pilot in Canada who had some medical issues and wanted to do the right thing and report it. Talked to my aviation medical examiner and he said it should be resolved within a month or two but it would need to be reviewed by the provincial head aviation medical examiner as it was a unique case. They came back wanting me to have 2 years of tests done costing $10k+ per year and monthly appointments to confirm I was fit to fly, and even after that I wouldn’t be allowed to fly alone to start which was required for the training I was doing at the time. So sadly I no longer fly. I tried taking it to a tribunal but that process was so disgusting slow it didn’t make a difference, lawyers could have helped but I didn’t have enough funds for one, my training was interrupted and it would have taken years to fight it. In terms of solutions, I really have no idea what can be done without a complete overhaul in the aviation medical system. The current system essentially requires a perfect health pilot or you don’t get a medical and it just encourages people to hide issues. It’s probably the major reason why alcoholism is so high among commercial pilots, it’s one of the few things that doesn’t put their career in danger as long as they stick to the rules.

The tension adjustment on that extruder isn’t the greatest and the best fix in the long run would be upgrading it to a better design. But in the mean time, I find there’s sometimes a bit of slop in the extruder mounting to the stepper. If you loosen the screws that secure the extruder to the stepper you may be able to move the extruder assembly in a way that gives the filament more space between the gear mounted to the stepper shaft and the pinching gear on the extruder arm. Yymv, sometimes theres a bit of play and sometimes theres not but it could help.