I think your bed is warping slightly as it heats up, which is normal. Set your bed temp to 105 for half an hour before starting your print and see if it still happens. If you have a V0 or other manually levelled printer, get the bed to 105 before levelling.

What are your bed temps for PLA and ASA? Does it still happen if you preheat the bed? If you rotate the print, does the rough spot follow the rotation?

“fill angle” under infill settings.

Yep. I can get ASA down to 12% with an ambient 50%RH using that method.

There are some models out there for wedges with reverse Bowden fittings so you can keep it cracked open all the time.

Try running your dryer with the lid propped open a bit. Most Sunlu dryers don’t have a way to get rid of the humid air pulled out of the filament.

PLAYERS: 0

Problem solved.

So say we all.

I got one of those ten years ago when they came out. It was a little ugly but it was snappy and could go for a couple of days on a charge. I can’t say the same for any of the WearOS watches I had since then.

V.35 or IEEE-488

Nah, this is Apple. It’s got to be the most expensive: Lemo medical grade.

N connector to SMA, and hardline to USB-C.

But one of those chonky third party ones with the buttons on the sides, and have a FireWire cable coming out of there too for that 2003 feel

It’s not known to be a backdoor, but it’s a juicy attack surface that customers are largely ignorant of and provides little consumer benefit. If I were an NSA employee and my boss handed me a blank check to develop a preboot exploit for Intel PCs, I’d start with IME.

20 years ago the pocketable digital cameras that took over the consumer market didn’t have hot shoes. 30 years ago the compact point and shoot viewfinders that were the weapon of choice for vacationing didn’t have hot shoes. Today neither are relevant and are all outclassed by smartphones, and there is hardly a consumer camera market.

You don’t have to spend five figures for that exposure, but it’s going to be an intentional hobby.

The intersection of people who aren’t five figures into photography and know what a hot shoe is, and people who recognize a wall mount phone trend old.

…but pdf and epub still work. Easily the least objectionable thing Amazon has done all year. But don’t let that get in the way of your mad.

Oh, like back in the Before Times when everything was statically linked?

More information on ChromeOS devices and developer mode.

Agreed, though I thought that all ChromeOS devices could be bootloader unlocked.

/dev/dsk/c0t0d0s0

older.fli