I think that it’s an underlying Spotify issue for sure, namely that an album is often present as an explicit and censored version. But I feel like Zotify should be able to deal with this.

While songs show up in Zotify with the [E] you usually just see multiple copies of the album without any identifiers. One of these will be the “real” album, but there doesn’t seem to be a way to filter the others.

There is this thing that I feel is most prevalent in the USA, to call any attraction to a girl under the age of 18 pedophilia. Because that’s the age to star in porn. The term should truly be used for attraction to children. I think it’s an extension of the “pedo panic” where every man is assumed for some reason to be a child rapist now.

As such almost every young man could at some point be caught as a “pedophile”- 17 year olds sneak into clubs all the time, for example. 20 year old hooked up with one? Now he is considered a pedophile even if the actual age of consent is lower.

Meanwhile the porn industry glorifies “barely 18” girls as something highly desirable. It’s a little messed up to say the least.

Actual pedos who are into kids should be put in mental institutions. But I would strongly suspect that 15% stated just includes honest young men and creepy old men, none of which are truly pedophiles. That number is way too high.

Don’t forget classics like Fuck_this_shit1! Fuck_this_shit2!

Militants specifically use these pagers for security and stealth. Everyone else just uses phones.

It’s a brilliant way to target only combatants, and also expose them to their friends and neighbours. This attack is incredibly disruptive with very little collateral damage compared to alternatives.

And yes, it’s terrorism, an attack meant to inspire terror and disrupt communication networks with a chilling effect much larger than the actual damage. However it’s interesting as unlike most terrorism it does not target civilians.

It’s also terrifying to think we are living in a world where a malicious component attack is a legitimate concern. This is one of those moments that change the world - I’m sure every industry is thinking about the danger of their foreign supply chain right now.

So uh yeah as we all know a lot of amphetamines have already been “open source” for a long time.

And we also know the DEA really doesn’t approve of private production… Vyvanse itself only really was created as a produg because of their control of the amphetamine market and their desire for products with lower abuse potential.

If we could get the DEA out of the way anyways, it would make more sense to just make dextroamphetamine as it’s simple, cheap and effective.

Gut an AC from the dump. Replace the condenser with a tube in tube heat exchanger, using your cold water as a heat sink. Brazed plate HX if you’re feeling rich. Replace the cap tube with a TXV for better load tracking. Recharge with R290.

T Sure this is even further beyond your skill level but is the best possible way to use a source of cold to chill your apartment. You can locate it anywhere convenient, not just by the window. You could likely get a COP over 5 and be discharging the water in a fairly modest stream at around 30-40C.

Great to hear this story of success. That plus

$266.99 per probe for the original proprietary one

Reminds me of Schneider’s stupid proprietary dongle for programming their PLCs. It’s just a CH341 in a funny shaped case that fits into the funny shaped slot on the PLC, where it plugs onto an ordinary 0.1" pin header to talk logic level serial.

Plus it has a custom USB ID of course. Probably costs $2 to manufacture, sells for almost $300 as well.

I don’t see how people like you miss the entire concept of “base load”.

I live in a region with vast amounts of renewable energy resources. It’s always windy and the sun shines almost every day. I have solar panels on my house that cover most of my DHW and a large fraction of my summer cooling load, and keep most of my appliances running.

But right now, the sun is down and the wind is flat. And I still need power. My battery storage would be depleted by morning, damaging it through overdischarge if I don’t buy power from the grid instead.

And it’s a lovely summer evening with no heating or cooling demand! What about midwinter, -35C and dark and snowy? Where is my power coming from on that day, after a month of days just like it?

Nuclear.

The simple solution sounds like it should be shipping more panels to the rest of the world?

Solar panels are still excessively expensive here in Canada

It’s complicated. The main issue is, I live on a remote farm without cell coverage, except in the tiny zone under my 50’ tower with booster.

However I now have Starlink, and wired and wireless APs covering a large area with high speed, low latency data.

So, port my number to VoIP.ms, which supports SMS, and make all my calls/texts through Wifi using SIP. On the road, use a basic cell plan with unlimited slow data that is still fast enough for voice. Tested, working, so far fairly simple.

Now the issues. RCS won’t work with my now VoIP provisioned number, because there’s no SIM for it. The SIM in the phone has a different number, that of the new plan which will be unreachable at the farm by voice/SMS just like the old number used to be.

This would all be a non-issue if my provider supported VoWifi on anything other than iPhones, but sadly this is not an option. So I’ve got service everywhere now, but am stuck with voice and SMS, no RCS or MMS.

Even worse, I’m migrating to an all-Voip solution because my carrier refuses to support VoWifi/VoLTE and it solves my coverage issues.

The only disadvantage is I’m forced to fall back all the way to SMS. No MMS even, and what about RCS, the new texting system that works through your data connection well there’s no support for that aside from using Google Messages and the SIM that’s in the phone!

Worst “open standard” ever

Reaction control system to me, lol

Right, we need to come up with better terms for talking about “AI”. Personally at the moment I’m considering any transformer-type ML system to be part of the category, as you stated none of them are any more “intelligent” than any others. They’re all just a big stack of tensor operations. So if one is AI, they all are.

Remember long ago when “fuzzy logic” was all the hype and considered to be AI? Just a very early form of classifier network but everyone was super excited at the time.

I’m just stating that “AI” is a broad field. These lightweight and useful transformer models are a direct product of other AI research.

I know what you mean, but simply stating “Don’t use AI” isn’t really valid anymore as soon these ML models will be a common component. There are even libraries and hardware acceleration support for tensor operations on the ESP32-S3.

It’s possible for local AI models to be very economical on energy, if used for the right tasks.

For example I’m running RapidOCR which uses a modern transformer architecture, and absolutely blows away traditional OCR at capturing data from character displays.

Doesn’t even need a GPU and returns results in under a second on a modern CPU. No preprocessing needed, just feed it an image. This little multimodal transformer is just as much “AI” as bloated general purpose GPTs, but it’s cheap, fast and useful.

Look at Saskatchewan, Canada. We’re the only province with a public telecom, SaskTel.

Most people in the cities and even larger towns have fiber, and our cell plans are significantly cheaper than anywhere else in Canada despite being a rural province with a large coverage area to population ratio.

We also have decent electricity rates considering we have no hydro, and the cheapest natural gas in Canada. Thanks to SaskPower and SaskEnergy.

Public utilities are the only way to do it, I’m always shocked to see people defend privatization in any way.

probably the best optical character recognition by far

I’ve actually just been working with OCR this week, trying to capture data off of the screen of a stupid proprietary Schneider device as that’s the only way to get at it.

Long story short Tesseract stinks at this task.

The Chinese designed PaddleOCR seems significantly superior as it runs a more modern neural net and requires a lot less preprocessing. I would class it as more of a “full service AI” and not just a simple recognition system like Tesseract, it can correct for skew and do its own normalization and thresholding internally while Tesseract wants a perfect boolean raster fed to it.

Unfortunately, the barrier to entry is a lot higher due to trying to understand their text vomit website and the fact that it seems prone to random segfaulting.

During the Cold War, Russia launched quite a few nuclear powered satellites, and I mean real fission reactors, not just RTGs. Apparently they’re still up there and possibly still generating power. So it’s pretty much a proven fact.

Yeah I know, but have you seen their site? It’s like an old 90s static HTML page. The main thing I see is that it’s clearly not a glossy “marketing first” service. They’re surviving off of their actual product.

Might be something patched in Tiny10 but it even activated fine for me with the usual hack and hasn’t caused any problems. I had to take it online momentarily on install to activate, but that was all.