pezmaker

I just looked myself up in the voter registrations and it seems I’m already unregistered after being gone so long. Must just be residual contact lists I need to keep responding stop to, it has slowed down. Thank you for the suggestion

I moved from Wisconsin a decade ago and I still get political shit from their parties. If there’sa good answer for this I hope you get it, I think this is just my life now.

If you have an m.2 slot, 2tb drives are cheap and don’t worry about it for a while

Edited: I originally absent mindedly said 2gb, meaning 2tb

As all things will be forgotten. So it goes.

To be clear, rent is usually one value for however many humans will be living there, but everywhere has different rules for pets. For the most part you’re restricted to one or two dogs specifically if they’re allowed at all. Some places will charge the same for one or more, some will charge more for 2. It’s really variable. But with RealPage leading the way with the largest rental management companies, is getting pretty unified and difficult to not get fucked over by.

Smaller pets like fish or hamsters usually aren’t mentioned or charged for though that I’ve seen.

It’s exactly what it sounds like. Extra bullshit monthly rent tacked onto the regular rent in addition to a usually non-refundable pet deposit at time of move in or pet adoption.

Basically you’re a money faucet in the US, and wide open if you have pets or kids

Take the the interstates, pretty much every gas station along those exits will be built to accommodate your situation. I drive from Colorado to Wisconsin and back a couple times a year on I 80 and see a lot of similar setups to what you’ll be doing. It’ll be fine. You got this.

Too bad he didn’t consider that an investment in his future and not just explicitly that show.

What I recognized as “brain shocks” when I was taking generic escitalipram (Lexapro) would be a feeling sort of like a short circuit in my brain for a quick flash of a moment. Like another commenter said, quick movements of my eyes or head could cause it. It was quick, and non lingering, but could happen frequently. Just a little bzzt! In the brain with a little visual stutter. It didn’t hurt but it was disconcerting until I realized it was normal when missing or cutting down doses. Sounds like it can happen for some people on the normal dose but that wasn’t an issue for me.

Guarantee that A) it doesn’t taste just like real butter, and B) it’ll make you shit yourself and bring a return of the label “may cause anal leakage”.

Does that mean it’s not a potentially viable product? No, it doesn’t. But let’s not bullshit.

I think you’ve got part of it right from my recollection and experiences, but not quite the full thing. I think Obama’s success actually lead shitty people to lash out more, which brought trump to power, which emboldened those shitty people to stop hiding it and actually be proud and display it. I think the racism and shittiness was always there but people kept more of a lid on it. We just aren’t able to pretend it isn’t who we are more broadly anymore.

And not just that, but it’s disingenuous. There’s no real interest here in an answer, it’s just intended to provoke interaction. Even all but the most overt, direct, owning it racists will claim racism is bad, regardless of their own actions and tendencies. Bad post is bad.

Edited to add: I feel like this community should be interpreted as having an implied “genuine” to it regarding the questions involved.

“as it’s called” or “as they’re called”? It’s a bit wordier but I think conveys the meaning you’re going for without the negative connotation. I also think context should usually direct a reader/listener to or from any negative connotation for the “so called” usage. That said, it doesn’t hurt to be clearer.

You basically described the other half of me right here. I waffle back and forth between your view and trying to do something about it. I go back to feeling it’s futile and doesn’t matter anyway, before getting fed up with targeted ads again. Wash, rinse, repeat.

This is just my opinion, but I don’t think so. I love the thought and wish there was, though. I think no matter what you do, it’s still information about a potential user/customer and still tells someone looking at it about you. “Oh, we have information on about 4% of the population that wants to actively subvert our data analytics.”. Obviously that’s made up, I didn’t bother trying to even guess what a potentially realistic number might be.

Again in my opinion, the only way to provide no value to data analytics is to not be a data point, and good luck with that. Best I’ve been trying to do is disable targeted ads anywhere I can, reset my identifier ids regularly on things like android tv where I can, and try to blast cookies anywhere possible. I don’t know if it even makes a difference or just makes me feel better

We’ve done many of the same mods. Klipper, Skr, Sprite pro, crtouch. I did the dual z drive mod too, though I have no idea if that’s actually improved anything or not. Probably now that I’ve setup input shaping and have this thing whipping through prints.

Ok, yeah, forget the paper as far as regular leveling goes with the cr touch. Have you tried confirming your z offset since you changed the nozzle? If you haven’t, it should be fine every time you do something to the hotend.

Also make sure your heat block isn’t stripped out. I had a bitch of a time printing for a while only to discover I had overtightened my middle and stripped out the threads in the heat block. After I replaced it I had consistent good prints again.

Is there a way you can confirm your bed or nozzle temps? I know for the nozzle that’s a really difficult thing to do, it’s so small to be able to check with anything.

I ask because with your unexpected crash the other day from your post history, I wonder if your main board has glitched.

A 90c bed shouldn’t melt petg I’d think, so something is definitely weird there.

Might be worth trying to reflash your firmware in case the glitch isn’t hardware.

What other mods have you done to your printer besides spring spacers?

When you level the bed, is it manually and with a piece of paper to help gauge the distance?

These things have so many places something can go off that it’s really difficult to help troubleshoot without being there. Hopefully something in this post helps you out.