“never plug extension cords into extension cords” is probably the most common piece of electrical related advice I’ve ever heard. But if you have, say, 2 x 2m long extension cords, and you plug one into the other, why is that considered a lot more unsafe than just using a single 4 or 5 meter cord?

Does it just boil down to that extra connection creating another opportunity for the prongs to slip out and cause a spark or short circuit? Or is there something else happening there?

For that matter - why aren’t super long extension cords (50 or more meters) considered unsafe? Does that also just come down to a matter of only having 2 connections versus 4 or more on a daisy chained cord?

Followup stupid question: is whatever causes piggybacked extension cords to be considered unsafe actually that dangerous, or is it the sort of thing that gets parroted around and misconstrued/blown out of proportion? On a scale from “smoking 20 packs of cigarettes a day” to “stubbing your toe on a really heavy piece of furniture”, how dangerous would you subjectively rate daisy chaining extension cords, assuming it was only 1 hop (2 extension cords, no more), and was kept under 5 or 10 metres?

I’m sure there’s probably somebody bashing their head against a wall at these questions, but I’m not trying to be ignorant, I’m just curious. Thank you for tolerating my stupid questions

  • r00ty@kbin.life
    link
    fedilink
    arrow-up
    2
    ·
    2 days ago

    Resistance alone doesn’t cause heat. Drawing current through resistance causes heat at the point (or points) of resistance. Which is why I clarified that it’s not likely so much a problem on small loads.

    This is why resisters come in different physical sizes. Because they have differing abilities to dissipate power as heat.

    A good example is of dummy loads in radio use. Which needs to dissipate the power output of a radio. That can be anything from milliwatts to a kilowatt. Up to probably 50w they will have a basic heatsink. I’ve seen huge drums filled with oil as 50ohm resisters to handle up to a kilowatt of dissipation.