A while back, I went to one of those corporate places for an oil change. They fucked up putting the metal thing back on the undercarriage, but a family member told me it would be okay without that. So I’ve been driving without the metal protective layer thing.

This fell off sometime on my drive home from work. We are currently experiencing tornadoes, so I can’t examine it too closely at the moment. It appears that it was just zip tied back on…

I am dead broke - my money this month has to go to car insurance, I can’t even afford registration at this point.

Can I just rip it off? I need an oil change soon, but I’m going to try to stretch it out a month or so.

  • BlueLineBae@midwest.social
    link
    fedilink
    English
    arrow-up
    77
    ·
    2 days ago

    Generally it’s fine to remove those but I would consider having it put back on if you live anywhere that gets snow. Reason being is that this plate protects undercarriage parts from excessive corrosion as a result of salt on the roads. So your car isn’t going to break down if you remove it, but if you plan to keep the car long-term, it can extend the life of those parts. As someone who works on my own car and has also had several 15+ year old vehicles, I can attest that this plate does indeed reduce corrosion in those areas.

  • Bytemeister@lemmy.world
    link
    fedilink
    English
    arrow-up
    32
    ·
    2 days ago

    Zipties, thread, scrap wire… I would try to put it back on, even badly if necessary.

    No it is not necessary for your car to work. However…

    It helps improve the fuel economy of your vehicle, which will save you money. It will reduce rust and wear on your vehicle, which will save you money. It costs a ridiculous amount of money to replace that piece of plastic. Typically, those pieces are layered on, and the the piece behind it may rely on the one in front to stay attached correctly.

    If you plan to have the car for more than a year or two, I would recommend finding a way to remove it properly, or re-fasten it to the car.

  • RedditIsDeddit@lemmy.world
    link
    fedilink
    arrow-up
    31
    ·
    2 days ago

    I’ve had a couple cars that have a skid plate like this leaving it off isn’t generally going to be a problem but it does protect you know the undercarriage of your car just get it fixed when you’re can afford to and you should be fine

    • DaGeek247@fedia.io
      link
      fedilink
      arrow-up
      10
      ·
      2 days ago

      They’re also there for wind resistance management. Removing it will basically do nothing bad though.

  • Raltoid@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    edit-2
    2 days ago

    Depends on the car, but they’re usally there to protect something. Removing it could mean water and mud splashing up near the belts, potential damage to the oil pan from rocks, etc.

    It appears that it was just zip tied back on…

    yeah that’s not uncommon, just drive the front onto a curb, put blocks on the wheels, and use some sturdy zip ties.

  • vapeloki@lemmy.world
    link
    fedilink
    arrow-up
    21
    arrow-down
    1
    ·
    edit-2
    2 days ago

    That part is responsible for 3 things:

    • Noise. It reduces the amount of turbulence under the car
    • fuel efficiency, same as Noise
    • protection from the environment. It reduces the amount of dirt and water that hits parts like the engine and other stuff there

    It is not critical and as others said, you could leave it of. I would recommend to have a look of there was any other damage done while they ripped off, as the weather allows to

  • Lasherz@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    2 days ago

    Depends where it came from. It’s worth going down to take a peak. You do not want water splashing against your belts. As others have said, if you live in Salt brine weather, you really don’t want that stuff anywhere near stuff that isn’t protected.

    • orbituary@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      6
      ·
      edit-2
      2 days ago

      This person is pushing off their oil change a month or two. The ground is wet and they don’t know what underside sheeting and guards are. They aren’t going to take a peek. They’re asking if they have to care or not.

      For the record, they don’t…

      • Lasherz@lemmy.world
        link
        fedilink
        arrow-up
        5
        arrow-down
        2
        ·
        edit-2
        2 days ago

        Seems to be about money. Belts, rust damage, and engine internals cost more in the long run. Do they have to pay their credit card bill? “For the record, they don’t…” Zip ties must be expensive now days… damn tariffs.

        • andros_rex@lemmy.worldOP
          link
          fedilink
          arrow-up
          5
          ·
          2 days ago

          Yes, it is all about money. I have negative 100,000 dollars, because my dumbass thought supporting my trust fund husband through his schooling would mean something, and instead got tortured and shackled with hell credit card debt. I don’t get an oil changed because I am terrified when I do they will say something is even more fucked withi and it will be 10 billion dollars please. I am getting a second job. I need to be able to make it to the first job.

          I fucking hate the car. I want to drive it into the surface of the sun. The ac has never worked.

          At one point I knew how to do an oil change. I could do it on my Corolla, because that was designed in a way that a human being can interact with. The 2018 Honda Civic is designed in such a way to obstruct the fact that it is fundamentally a broken vehicle.

          • Lasherz@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            2 days ago

            Understandable. Civics are quite well made, so I wouldn’t expect it to immediately become a rust trap from some short term splashes. Generally, mechanics will tell you other stuff is wrong, but it only matters if it’s adjacent to what they’re working on for liability. They may find some problems like a glazed dipstick from going too long between changes, but it’s just informational.

            If you’re interested in putting that plate back on, my guess is that they used plastic zip ties on a metal shield. Usually, manufacturers will only use more expensive metal guards if it gets hot in that location. You can buy metal cable ties real cheap that will hold up much better. Fasteners are also cheap if you can figure out which one, but I dunno if I’d bother on a car that’s on its way out in my mind.

            Recommendation is just to prioritize it before Winter weather.

            Sorry your money situation is so dire. Credit can be the hell that keeps on giving.

        • orbituary@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          2 days ago

          You act like the bottom of a car is hermetically sealed.

          These things act as deflectors for debris and channel airflow better. There may be nominal protection for belts, but that’s not a massive factor given most belts are behind the fan and aren’t likely going to take damage or get damaged. Particularly given the break angle from the underside of the car and where these things are positioned… neither this photo, nor the person’s attitude, connote that this is a performance vehicle.

          Few non-aircooled cars require flashing for cooling, either. Older Porsches (993s and prior), aircooled VWs, Corvairs, and other aircooled cars need proper flashing to vent and restrict airflow. Water-cooled rely more on the radiator, thermostat, and fan.

          Edit: typos and shit.

          • Lasherz@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            edit-2
            1 day ago

            Don’t really see a major disagreement here other than the direction of primary exposure, belts some how being protected behind a fan when the main exposure is from the sides, etc. Puddles have a lot more corrosion potential than rain/snow. Point isn’t to seal, that’s unrealistic, but rather to deflect enough that every puddle isn’t pressure washing your engine bay with salt water. An example car where this was a major issue was a 97 galant, which had the crank shaft low and in alignment with the water jet from the driver side tire. There was a splash shield that directly intercepted the inner spray. I would classify that case as more than nominal protection.

            Edit: Maybe you’re working mostly on RWD cars, could explain our misunderstanding. I mostly work on FWD Sedans and AWD SUVs

            • orbituary@lemmy.dbzer0.com
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 day ago

              I have both. I also worked as a mechanic for many years. I realized that I was exhausted with this conversation, so I don’t feel like discussing it anymore.

              OP is fine.

  • Derpenheim@lemmy.zip
    link
    fedilink
    arrow-up
    6
    arrow-down
    1
    ·
    edit-2
    2 days ago

    Your car will not fall apart. It will, however, rust like hell over the next few years if you live somewhere that regularly salts in the winter to keep ice off the road.

    • andros_rex@lemmy.worldOP
      link
      fedilink
      arrow-up
      6
      ·
      2 days ago

      I despise my car and would mutilate it, hammer it into pieces and repurpose the corpse as some kind of art exhibit, were it not for its necessity in keeping some form of employment.

  • confusedwiseman@lemmy.dbzer0.com
    link
    fedilink
    arrow-up
    5
    ·
    2 days ago

    As others have said, works without it; but you probably want it there.

    Order one from eBay that fits your year, make, model. You may need to get fasteners separately.

    I had this same thing break on my truck. It cost $35 for an off brand replacement that fit perfectly.

  • paequ2@lemmy.today
    link
    fedilink
    English
    arrow-up
    4
    ·
    2 days ago

    I went to one of those corporate places for an oil change … This fell off sometime on my drive home from work.

    Exact same thing happened to me. Ever since then, I do my own oil changes.

    Although, there’s definitely a startup cost. If you’re tight on cash, then I wouldn’t recommend it.

    I guess the splash shield isn’t essential for driving… although, you should probably get it back on at some point. It’ll keep the elements out of the engine a bit. Getting water down there will probably lead to corrosion in the future. Not to mention rocks that could dent things down there.

    It shouldn’t actually be too hard to put it back on. It’s usually just held on by plastic screws. You just need to buy replacement screws (a few bucks) and find a screw driver. The hard part would be lifting the car high enough so you can crawl under it. Then just line up the holes and put the screws on.

  • ryannathans@aussie.zone
    link
    fedilink
    arrow-up
    4
    ·
    2 days ago

    Probably not critical but beware on some vehicles they are structural and support the transmission or other components, such as on some Jeeps

  • Concetta@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    2 days ago

    If that’s metal and a side pic of the vehicle I would make sure it’s not the tank protector, if it is you might have to replace at you want something protecting a plastic tank. If it is from the tank, I would recommend putting a few zip ties up to hold it, if not you’ll be fine. Only other thing is water can do damage depending on where it hits (to wiring and modules) so don’t aim for puddles and you’ll be fine.

    Edit: more I look it’s plastic, you’ll be fine.

  • HappySkullsplitter@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    2 days ago

    Supposedly they’re meant to help prevent corrosion, but it’s really more up to where the car is being driven

    I’ve seen cars without them and zero corrosion and cars with them with serious rust issues

    It just depends on how much salt the car is exposed to over its life

  • neidu3@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    edit-2
    2 days ago

    Yeah, it’s fine. If that is the part I think it is, it’s a cover for the bottom of your engine - not strictly needed (my previous car didn’t even have one when new).

    It somewhat protects your cars nether regions from minor damage from rocks and similar, but for the average driver it doesn’t do much - Most debris that would damage your engine would also easily pierce through the cover.

    There is an aerodynamic component at play here, but it’s not critical. It might also shield your cars innards and prevent turbulent airflow to reduce noise, but again; not critical

    • andros_rex@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      2 days ago

      About $150.

      I am picking up a second job. A third one will probably put me at the point where I’m suicidal again, and that gets expensive fast ❤️

      If you can help me get to a place where it doesn’t matter that the science teacher is a trannyremoved, that’ll be less of a problem ❤️