Rants are welcome, even encouraged :)

Feel free to skip the following text

The last 4 phones I had were just a mess. I am starting to loose hope of there being something that would work well. I just recently got a new phone, it’s a mess as usual. Maybe what I am experiencing is enough for a warranty claim, maybe it’s just a quirk to be dealt with…

Every couple years every newer phone I try is just worse and worse. I thought that maybe once PinePhone and available software gets mature enough…, but at this point, maybe other phones will just get crap enough.

My last good phone was ironically an ultra-cheap Lark Cumulus 5HD. It was just 50 EUR new. No lags, no crashes, swappable battery, a just works experience. 50 bucks…

Chronologically…

Moto G5s Plus

Great hardware, except that focus on my camera was kind-of broken, but I was too lazy to get that repaired under warranty.
But SW, god damn Motorola. Slow buggy mess. Crashes, freezes, battery drain. BUT, I was able to fix it with ✨a custom ROM✨

Poco X3 Pro

If you had any MIUI device, you know. Alarm clock may get killed optimized, ton of bugs to learn working around, built-in ads and spyware. Lots of it, based on blocked DNS logs.
HW - cheap and powerful. Average lifespan of the motherboard being whopping… 9 months. The phone ate 3 of them.

Moto G54 5G Power

Once again, great HW, SW not so much. The 3 button navigation was completely broken in high DPI and what made me return it - non-skippable updates. Just full-screen permanent update notifications. Only option: update. Nope.

Ulefone Armor 24

Few SW issues: Long-pressing dock icons while an app is open crashes “Quickstep”, in turn killing navigation (both gesture and buttons…). Alarm clock gets killed most of the time even with all optimizations off.
HW, least I think I should classify it as such: The phone has a chance to negotiate (?) 12V for split-second intervals using QC 2.0 (based on my USB tester) which it doesn’t expect, and throws overvoltage error. This happens with all QC-compatible chargers I tried, even the original one when used with OTG adapter.
The original one otherwise uses USB-C with PD, which works, sure. But after using it data transfer to PC via cable is broken until reboot.


I was very much a full-time phone person, but now it’s too much. I got a cheap touchscreen ThinkPad and use it with KDE Plasma (wayland). I was doing basically everything on a phone before, now I instead try not to, but with everything being an app, damn.

  • MTK@lemmy.world
    link
    fedilink
    arrow-up
    8
    ·
    25 days ago

    Small phones pleaseeeee!

    Every time I buy a new phone I’m devastated to learn that I can’t get anything usable with one hand.

    I need a 5.5 inch phone, anything bigger is hard to use, anything past 6 is impossible with one hand

        • u/lukmly013 💾 (lemmy.sdf.org)@lemmy.sdf.orgOP
          link
          fedilink
          English
          arrow-up
          3
          ·
          24 days ago

          I try to keep it around 20 - 80 %, that’s 2 - 3 days. Fully charged, (by the way, there is more capacity beyond “100%”), 4 possibly even 5 if going to like 5%.

          But I use it heavily.

          Also, that flashlight at the back can actually drain it quite fast. Hell, if you have like 30% it can’t keep it on full power steadily, it starts flickering a bit. It gets completely disabled <20%. Earlier if you use it in the camera app. Ideally, if you want to use it combined with the camera you’ll have > 50%.

          You may be able to charge your laptop from it if it supports 5V charging. It can supply 10W. To get some idea, my ThinkPad L390 yoga is currently consuming 3.73W as I am typing this.

          But as I wrote, good luck charging it, though my unit may be defective. I don’t have another one to compare to.